The left section was waxed with a name brand synthetic polymer sealant while the right was coated with CQuartz UK 3.0 ceramic. Ask Mike Phillips your detailing questions! You will likely want a couple of high-pile or finishing towels handy. Apply it directly on a microfiber cloth and gently clean along the trim to get rid of as much of the old wax as possible.​, Detailing clay is an engineered compound which is normally used to get rid of contaminants from your car glass, metal, paint and fiberglass. Experts claim that consumer ceramic coatings last anywhere from 8 to 12 months in direct sunlight, car washes, and outdoor conditions before a top-coat re-coating is needed.

When the coating no longer spreads, you need to apply more product to your applicator and continue to work it similar to waxing a car.

I used a lint-free 800GSM (grams per square meter) microfiber towel for buffing and wiping off the wax. Make sure to always keep the surface slick by using a quick detailer of your choice as a clay bar or mitt lubricant. Eraser is an intense cleaner designed to dissolve oil particles and remove polish residue to prepare the paintwork for Cquartz.

For the final step, prep the surface with an IPA (Isopropyl Alcohol) wipe down. My daily driver has been ceramic coated with CarPro CQUK 3.0 and washed and maintained weekly with Turtle Wax Seal N Shine without the need to wax. Proceed by washing the car or part with a wax-free or gloss-free soap. Both of these pre-wax cleaners are accessible at supply store. However, you might want to carefully choose the right products to remove your old wax without damaging your paint. All the steps above are simple and you can learn how to remove wax from car at home.​, If you follow our instruction carefully, you will be able to keep your vehicle looking as good as new. Consult a professional if needed.​. Claying removes bonded paint contamination and leaves behind a clean and smooth surface that is ready for wax/sealant application or even polishing. You might want to ask a mechanic to find out which types of wax remover is best for your car.​, Remember to read carefully the instructions on the bottle of the wax remover before using. Failure to do so may result in scratches or streaks upon the paintwork. An IPA spray is an alcohol which helps to remove wax and oils also. CarPro Reset Shampoo is a car shampoo designed specifically to maintain Ceramic Sealants, by removing the dirt whilst not effecting the coating itself.CarPro Reset was formulated specifically for nano-technology based sealants and coatings, with cleaning properties tailored to their unique needs. The neighborhood cat was also helping the cause by using the trunk as his little sunbathing spot. Do you want to be informed whenever we publish a new article? You need to clean it carefully in order to get all the old wax removed.​, Reapply if necessary. Move from the top down using a wool or microfiber mitt, rinsing the mitt periodically in a second bucket filled with clear water.

You’ll typically find a few different types of IPA (either in 70 percent or 90–99 percent range). CarPro Reset - Intensive Car Shampoo. Detailing clay is similar to the clay that we used to play when we were a kid; however, the clay used for detailing is normally much more elastic. Dishwashing soap is abrasive and formulated to remove grease and caked-on food.

It is important to remove these surface contaminates often. This allows clay bar to remove more old wax afterward.​, In this step, you’ll need a clay lubricant. First introduced over a decade ago, ceramic coatings were exclusive to professional detailers at that time. Notice the newly waxed surface on the left took a severe hit. I picked up a few foam pads at my local Harbor Freight, including this finishing pad to apply the final sealant coat. Thanks to nanotechnology and ceramic car coating, however, it was found that even aggressive washing cannot cause swirls and scratches. Other than the dirt streaks flowing down the side skirts, the entire car including the door panels are smooth to the touch and still looks clean as a whistle. Meguiar’s Iron Decon sprays on clear, then turns purple once it reacts with ferrous metals and releases embedded contamination. He's an auto blogger.

There are many videos on the internet regarding how to perform this process, so we’ll cover the highlights here. Wait for about 30–45 seconds for the product to flash (this varies depending on the temperature and humidity) then buff it off. ​First of all, you need to wash your car using water and a non-drying soap to get rid of all the grime and dirt from the paint surface.

This stuff is nasty when inhaled. If you try to apply a coating on top of a wax, you’ll get a very weak bond that will degrade quickly.